profile image
Haha nice. I also have 2 full extensions running with 2 ths and 35 watts each. The third one has already been ordered but then that's enough. 100 watts should be the max for me. 😁
•
1
•
profile image
@Edge How do you do it with the cooling and what mhz and volts do you run for 2nd ?
••
profile image
@Testo-Investor 1.35v and 950 MHz are running. Cooling with noctua and Low Profile Plus cooler is no problem and does not exceed 50°. Limitation is the voltage temperature with 80°
•
1
•
profile image
@Edge how does it work room temperature 20 degrees, no one runs at 1100 , 650 mhz at 60 degrees at 70% Noctua fan ...
••
profile image
@Testo-Investor Have a look at my profile. Also goes to 2.3 th if you could cool the voltage converters.
••
profile image
@Edge Oh, so you have installed the really thick block and a much larger cooler. What do you think is possible with the stock cooler and the Noctua a4 20 5 V? How many degrees should the core temperature not exceed?
••
profile image
@Testo-Investor Vcore temps max 80°. if you have the standard 30w power supply from Amazon, you get max 24.5 watts in and don't get over 1.4 ths. i think 1150v and 750 mhz i had with the setup back then. but with copper on the back.
••
profile image
@Edge Copper arrives on Monday .... 18 set... yes but what's the point ... whether 1.4 or 2 Th.... The chance of finding a block is still completely shit.... Or is there an advantage?
••
profile image
@Testo-Investor 30% higher probability because 30% more shares and if I pay 150€ for 1.1th why not buy upgrades for 40€ and have twice as much? but everyone has to know for themselves.
•
1
•
profile image
@Edge yes, I fully agree with you! Do you have any links for me as to what I need?
••